Contrast Womens Zaxy Flats Ivory Heart Pop Flock Ballerina rEwwOqdZ
The construction of linear combinations of the basis of atomic movements allows the vibrations belonging to irreducible representations to be investigated. The wavefunction of these symmetry equivalent orbitals is referred to as Symmetry Adapted Linear Combinations, or SALCs. SALCs (Symmetry Adapted Linear Combinations) are the linear combinations of basis sets composed of the stretching vectors of the molecule. The SALCs of a molecule can help determine binding schemes and symmetries. The procedure used to determine the SALCs of a molecule is also used to determine the LCAO of a molecule. The LCAO, Linear Combination of Atomic Orbitals, uses the basis set of atomic orbitals instead of stretching vectors. The LCAO of a molecule provides a detailed description of the molecular orbitals, including the number of nodes and relative energy levels.
Symmetry adapted linear combinations are the sum over all the basis functions:
ϕi=∑jcijbj
ϕi is the i^{th} SALC function, bj is the j^{th} basis function, and cij is a coefficient which controls how much of bj appears in ϕi. In method two, the projection operator is used to obtain the coefficients consistent with each irreducible representation.^{1}
The SALCs of a molecule may be constructed in two ways. The first method uses a basis set composed of the irreducible representation of the stretching modes of the molecule. On the other hand, the second method uses a projection operator on each stretching vector. When determining the irreducible representations of the stretching modes, the reducible representations for all the vibrational modes must first be determined. Basis vectors are assigned characters and are treated as individual objects. A
Background
In order to understand and construct SALCs, a background in group theory is required. The identification of the point group of the molecule is essential for understanding how the application of operations affects the molecule. This allows for the determination of the nature of the stretching modes. As a review, let’s first determine the stretching modes of water together. Water has the point group C_{2v}. Table 1 is the character table for the C_{2v} point group.
C_{2v}  E  C_{2}  σ_{v}(xz)  σ_{v}'(yz)  

A_{1}  1  1  1  1  z  x^{2}, y^{2}, z^{2} 
A_{2}  1  1  −1  −1  R_{z}  xy 
B_{1}  1  −1  1  −1  x, R_{y}  xz 
B_{2}  1  −1  −1  1  y, R_{x}  yz 
The first step in determining stretching modes of a molecule is to add the characters contained in the x, y, and z rows to obtain the total reducible representation of the xyz coordinates, Γ_{XYZ}. Γ_{XYZ} can also be found by applying the symmetry operations to the three vectors (x, y, and z) of the coordinate system of the molecule. The next step involves the investigation of the atoms that remain unchanged when an operation is applied, Γ_{UMA}. This step refers to the unmoved atoms (UMA). Multiplying Γ_{XYZ} and Γ_{UMA} gives the reducible representation for the molecule referred to as Γ_{TOTAL}. The Γ_{TOTAL} is the reducible representation for all the modes of the molecule (vibrational, rotational, and translational) and can also be determined by applying the symmetry operations to each coordinate vector (x, y, and z) on each atom.
C_{2v}  E  C_{2}  Flats Flock Heart Womens Zaxy Pop Ivory Contrast Ballerina σ_{v}(xz)  σ_{v}'(yz) 

Γ_{XYZ}  3  1  1  1 
Γ_{UMA}  3  1  1  3 
Γ_{TOTAL}  Flats Heart Contrast Ivory Ballerina Womens Flock Pop Zaxy 9  1  1  3 
Γ_{TOTAL} is then reduced to later give the stretching modes that are unique to the molecule. First, the reduction formula is applied to decompose the reducible representation:
ai=1h∑R(XRXRiCR)
Here, a_{i} is the number of times the irreducible representation will appear in the initial reducible representation. The order of the point group is represented by h; R is an operation of the group; X^{R} is a character of the operation R in the reducible representation; X_{i}^{R} is a character of the operation R in the irreducible representation, and C^{R} is the number of members in the class to which R belongs. Applying this formula and subtracting the representations obtained from the basis functions x, y, z, R_{x}, R_{y}, and R_{z} (for the translations and rotations of the molecule) gives the irreducible representation that corresponds to the vibrational states of the molecule:
Γ_{Vibration} = 2a_{1} + b_{2}
A simple check can be performed to determine that the right number of modes was obtained. For linear molecules (3N5) gives the correct number of normal modes. For molecules with any other shape otherwise known as nonlinear molecules, the formula is (3N6). N represents the number of atoms in a molecule. Let’s double check the above water example:
(3N−6)N=3
[3(3)−6]=3
Water should have three vibrational modes. When the irreducible representation was obtained, it was seen that water has two a_{1} modes and a b_{2}mode for a total of three.
When double checking that you have the correct number of normal modes for other molecules, remember that the irreducible representation E is doubly degenerate and counts as two normal modes. T is triply degenerate and counts for three normal modes, etc.
Constructing SALCs
Method 1
There are multiple ways of constructing the SALCs of a molecule. The first method uses the known symmetries of the stretching modes of the molecule. To investigate this method, the construction of the SALCs of water is examined. Water has three vibrational states, 2a_{1}+b_{2}. Two of these vibrations are stretching modes. One is symmetric with the symmetry A_{1}, and the other is antisymmetric with the symmetry B_{2}. While looking for the SALC of a molecule, one uses vectors represented by b_{j} as the basis set. The vectors demonstrate the irreducible representations of molecular vibrations.
Figure 1.1: The stretching modes of H_{2}O.
The SALCs of water can be composed by creating a linear combination of the stretching vectors.
ϕ(A1)=b1+b2
and
ϕ(B1)=b1−b2
Normalization
The final step in constructing the SALCs of water is to normalize expressions. To normalize the SALC, multiply the entire expression by the normalization constant that is the inverse of the square root of the sum of the squares of the coefficients within the expression.
ϕi=N∑jcijbj
N=1√n∑j=1c2ij
ϕ(A1)=1√2(b1+b2)
and
ϕ(B1)=1√2(b1−b2)
Normalizing the SALCs ensures that the magnitude of the SALC is unity, and therefore the dot product of any SALC with itself will equal one.
Method 2
The other method for constructing SALCs is the projection operator method. The SALC of a molecule can be constructed in the same manner as the LCAO, Linear Combination of Atomic Orbitals, however the basis set differs. While looking for the SALCs of a molecule, one uses vectors represented by b_{j}, on the other hand, while looking for the LCAO of a molecule, one uses atomic orbitals as the basis set. The vectors demonstrate the possible vibration of the molecule. While constructing SALCs, the basis vectors can be treated as individual vectors.
Example 1.1: Water
Let’s take a look at how to construct the SALC for water. The first step in constructing the SALC is to label all vectors in the basis set. Below are the bond vectors of water that will be used as the basis set for the SALCs of the molecule.
Figure 1.2: Labeled vectors of H_{2}O.
Next, the basis vector, v, is transformed by T_{j}, the jth symmetry operation of the molecule’s point group. As the vector of the basis set is transformed, record the vector that takes its place. Water is a member of the point group C_{2V}. The Symmetry elements of the C_{2V} point group are E, C_{2}, σ_{v}, σ_{v’}.
The i^{th} SALC function, ϕ_{i}is shown below using the vector v=b_{1}.
Giro Titanium Women's Shoes Cycling Savix White AzZqFrAn
Figure 1.3: The transformations of the basis vectors of H_{2}O.
Once the transformations have been determined, the SALC can be constructed by taking the sum of the products of each character of a representation within the point group and the corresponding transformation. The SALCs functions are the collective transformations of the basis sets represented by ϕ_{i}where X_{i}(j) is the character of the ith irreducible representation and the jth symmetry operation.
ϕi=∑jXi(j)Tjν
Table 1.3: Projection Operator method for C_{2v}
The final step in constructing the SALCs of water is to normalize expressions.
Table 1.4: Normalized SALCs of H_{2}O
There are two SALCs for the water molecule, ϕ_{1}(A_{1}) and ϕ_{1}(B_{2}). This demonstrates that water has two stretching modes, one is a totally symmetric stretch with the symmetry, A_{1}, and the other is an antisymmetric stretch with the symmetry B_{2}.
Figure 1.4: The stretching modes of H_{2}O resulting from Method 2.
Interpreting SALCs
Both methods of construction result in the same SALCs. Only irreducible representations corresponding to the symmetries of the stretching modes of the molecule will produce a SALC that is nonzero. Method 1 only utilized the known symmetries of the vibrational modes. All irreducible representations of the point group were used, but the representations that were not vibrational modes resulted in SALCs equal to zero.
Therefore, with the SALCs of a molecule given, all the symmetries of the stretching modes are identified. This allows for a clearer understanding of the spectroscopy of the molecule. Even though vibrational modes can be observed in both infrared and Raman spectroscopy, the SALCs of a molecule cannot identify the magnitude or frequency of the peak in the spectra. The normalized SALCs can, however, help to determine the relative magnitude of the stretching vectors. The magnitude can be determined by the equation below.
a⋅b=abcosθ
The resulting A_{1} and B_{1} symmetries for the above water example are each active in both Raman and IR spectroscopies, according to the C_{2v} character table. If the vibrational mode allows for a change in the dipole moment, the mode can be observed through infrared spectroscopy. If the vibrational mode allows for a change in the polarization of the molecule, the mode can be observed through Raman spectroscopy. Both stretching and bending modes are seen in the spectra, however only stretching modes are expressed in the SALCs.
Example 1.2: Difluorobenzene
The SALCs of a molecule can also provide insight to the geometry of a molecule. For example, SALCs can aid in determining the differences between paradifluorobenzene and orthodifluorobenzene. The SALCs for these two molecules are given below.
Figure 1.5: paradifluorobenzene
ϕ(Ag)=12(b1+b2+b3+b4)
ϕ(B1g)=12(b1−b2+b3−b4)
ϕ(B2u)=12(b1−b2−b3+b4)
ϕ(B3u)=12(b1+b2−b3−b4)
Figure 1.6: orthodifluorobenzene
ϕ1(A1)=1√2(b1+b2+b3+b4)
ϕ2(A1)=1√2(b1−b2+b3−b4)
ϕ1(B1)=1√2(b1−b2−b3+b4)
ϕ2(B1)=1√2(b1+b2−b3−b4Flats Ivory Contrast Womens Heart Ballerina Zaxy Pop Flock )
From the SALCs, it is seen that paradifluorobenzene has four stretching modes and orthodifluorobenzene has only two. Therefore, it is no surprise that the vibrational spectroscopy of the paradifluorobenzene shows more peaks than the orthodifluorobenzene.
Figure 1.7: FTIR Raman Spectrum of paradifluorobenzene^{4}
Figure 1.8: FTIR Raman Spectrum of orthodifluorobenzene^{5}
Applications
The SALCs of a molecule can be used to understand the stretching modes and binding schemes of a molecule. More information can also be interpreted when applying the projection operator used in SALCs on the atomic orbitals of the molecule. This results in the determination of the linear combination of atomic orbitals (LCAO), which gives information on the molecular orbitals of the molecule. The molecular orbitals (MO) of a molecule are often constructed as LCAOs. Each MO is a solution to the Schrödinger equation and is an eigenfunction of the Hamiltonian operator. The LCAOs can be determined in the same manner as the SALCs of a molecule, with the use of a projection operator. The difference is that the basis set is no longer stretching vectors, but instead the atomic orbitals of the molecule. Hydrogen only has s orbitals, but oxygen has s and p orbitals, where the p_{x}, p_{y}, and p_{z} all transform differently and therefore must be treated differently.
Once the LCAOs of the molecule have been determined, the expressions can be interpreted into images of the orbitals bonding. If two orbitals are of the same sign in the expression, the electrons in the orbitals are in phase with each other and are bonding. If two orbitals are of the opposite sign in the expression, the electrons in the orbitals are out of phase with each other and are antibonding. The image below shows the atomic orbitals' phases (or signs) as red or blue lobes.
Figure 1.9: Atomic Orbitals of H_{2}O.
Any separation between two antibonding atomic orbitals is a planar node. As the number of nodes increases, so does the level of antibonding. This allows for the LCAO to place the molecular orbitals in order of increasing energy, which can be used in constructing the molecular orbital (MO) diagram of the molecule. The irreducible representation used to construct the LCAO is used to describe the MOs. The LCAOs for water are shown below with red dotted lines showing the nodes. Notice the nodes for the p_{x} orbitals are in a different plane than the s orbitals of the hydrogens, so these are degenerate and nonbonding.
Figure 1.10: Molecular Orbital diagram for H_{2}O in order of increasing energy.
Information from the LCAO of water can also be used to analyze and anticipate the adsorption of water onto various surfaces. Evarestov and Bandura used this technique to identify the water adsorption on Ydoped BaZrO_{3} and TiO_{2 }(Rutile) respectively.^{2,3}
Example 1.3: CBr_{2}H_{2}
Applying a combination of Methods 1 and 2, the SALCs for CBr_{2}H_{2} can be determined. The point group of this molecule is C_{2v}, making it similar to the determination of SALCs for water.
Figure 1.11: CBr_{2}H_{2}, point group C_{2v.}
However, the central carbon contains more than one type of attached atom; therefore, the stretching analysis must be performed in pieces. First, the CH stretches are examined, followed by the CBr stretches:
C_{2V}  E  C_{2}  σ_{V}  σ_{V’}  Irreducible Representation 

Γ_{CH}  2  0  0  2  Γ_{CH }= A_{1 }+ B_{2} 
Γ_{CBr}  2  0  2  0  Γ_{CBr }= A_{1 }+ B_{1} 
Applying the projection operator method to CBr and CH stretches individually, the SALCs are obtained in the same fashion as before.
Γ_{CBr}  E  C_{2}  σ_{V}  σ_{V’}  SUM 

A_{1}T_{j}(b_{Heart Contrast Zaxy Ballerina Ivory Womens Pop Flock Flats 1})  b_{1}  b_{2}  b_{1}  b_{2}  2(b_{1} + b_{2}) 
B_{1}T_{j}(b_{1})  b_{1}  b_{2}  b_{1}  b_{2}  2(b_{1}  b_{2}) 
Γ_{CH}  E  C_{2}  σ_{V}  σ_{V’}  SUM 

A_{1}T_{j}(a_{1})  a_{1}  a_{2}  a_{2}  a_{1}  2(a_{1} + a_{2}) 
B_{2}T_{j}(a_{1})  a_{1}  a_{2}  a_{2}  a_{1}  2(a_{1}  a_{2}) 
The results are normalized and the following SALCs are obtained for the C_{2v} molecule CBr_{2}H_{2}:
ϕCBr(A1)=1√2(b1+b2)
ϕCBr(B1)=1√2(b1−b2)
ϕCH(A1)=1√2(aKid 5010 Kid Big Naturino Toddler Beige SS17 Little Womens FzqOwP1+a2)
ϕCH(B2)=1√2(a1−a2)
Example 1.4: PtCl_{4}
To obtain the SALCs for PtCl_{4}, the same general method is applied.
Figure 1.12: PtCl_{4}, point group D_{4h.}
However, even though the point group of the molecule is D_{4h}, the cyclic subgroup C_{4 }may be used (this is a more simplified character table used for spherically symmetrical molecules). Some manipulation is required in order to use this cyclic subgroup and will be discussed. Below is the C_{4} cyclic character table.
C_{4}  E  C_{4}^{1}  C_{Flats Zaxy Ballerina Pop Ivory Contrast Flock Heart Womens 4}^{2}  C_{4}^{3} 

A  1  1  1  1 
B  1  1  1  1 
E^{1} E^{2}  1 1  i i  1 1  i i 
Notice, there are two rows for E, each singly degenerate. To solve for the characters of E, one must take the sum and difference of the two rows. Then, a reduction can be applied to obtain the easiest possible characters by dividing each row by a common factor (removing the common factor is not necessary, but it does simplify the problem as well as remove any imaginary terms):
Sum = [ (1+1) (ii) (11) (i+i) ] = (2 0 2 0) ÷ 2 = E^{1 }(1 0 1 0)
Difference = [ (11) (i+i) (1+1) (ii) ] = (0 2i 0 2i) ÷ 2i = E^{2} (0 1 0 1)
Using the above cyclic group, and the newly obtained characters for E, the projection operator can be applied using Method 2 for the construction of SALCs.
C_{4}  E  C_{4}^{1}  C_{4}^{2}  C_{4}^{3}  SUM 

AT_{j}(b_{1})  b_{1}  b_{2}  b_{3}  b_{4}  b_{1} + b_{2} + b_{3} + b_{4} 
BT_{j}(b_{1})  b_{1}  b_{2}  b_{3}  b_{4}  b_{1}  b_{2} + b_{3}  b_{4} 
E^{1}T_{j}V Vans Shoe True 23 Walnut Ankle Canvas High White Skateboarding Style wwEHqg(b_{1})  b_{1}  0  b_{3}  0  b_{1}  b_{3} 
E^{2}T_{j}(b_{1})  0  b_{2}  0  b_{4}  b_{2 } b_{4} 
Normalizing the sum as mentioned in Method 1, the following SALCs are obtained for the D_{4h} molecule PtCl_{4}:
ϕ(A)=12(b1+b2+b3+b4)
ϕ(B)=12(b1−b2+b3−b4)
ϕ(E1)=1√2(b1−b3)
ϕ(E2)=1√2(b2−b4)
Example 1.5: PF_{2}H_{3}
Applying a combination of Methods 1 and 2, the SALCs for the CH stretches of PF_{2}H_{3} can be determined. The point group of this molecule is C_{s}. The central carbon contains more than one type of attached hydrogen; therefore, the stretching analysis must be performed in pieces. First, the CH_{A} stretches are examined, followed by the CH_{B} stretches:
Figure 1.13: PF_{2}H_{3}, point group C_{s.}
C_{s}  E  Ivory Heart Womens Zaxy Contrast Pop Flats Ballerina Flock σ_{h}  Irreducible Representation 

Γ_{CHa}  2  0  Γ_{CHa }= A’ + A” 
Γ_{CHb}  1  1  Γ_{CHb }= A’ 
Applying the projection operator method to CH_{A} and CH_{B} stretches individually, the SALCs are obtained in the same fashion as before.
Lucky Women's Lucky Black Women's gwqgX8xYzΓ_{CHB}  E  σ_{h}  SUM 

A’ Tj(b_{1})  b_{1}  b_{2}  b_{1 }+ b_{2} 
A” Tj(b_{1})  b_{1}  b_{2}  b_{1}  b_{2} 
A’ T_{j}(a_{1})  a_{1}  a_{1}  a_{1 + }a_{1} 
Γ_{CHA}  E  C_{2}  σ_{V}  σ_{V’}  SUM 

A_{1}T_{j}(a_{1})  a_{1}  a_{2}  a_{2}  a_{1}  2(a_{1}+ a_{2}) 
B_{2}T_{j}(a_{1})  a_{1}  a_{2}  a_{2}  a_{1}  2(a_{1} a_{2}) 
The results are normalized and the following SALCs are obtained for the C_{Pop Contrast Heart Flats Flock Zaxy Ballerina Ivory Womens s} molecule PF_{2}H_{3}:
ϕ1A′=1√2(b1Flats Womens Ivory Ballerina Zaxy Heart Contrast Flock Pop +b2)+a1=1sqrt3(b1+b2+a1)
ϕ2A′=1√2(b1+b2)−a1=1sqrt3(b1+b2−a1)
ϕA″=1√2Vita Women's Boot Ankle Black Deedee Dolce Leather SRqw7n(b1−b2Flats Ballerina Heart Contrast Pop Ivory Womens Flock Zaxy )
Problems
 Construct the SALCs for CH stretches of orthodifluorobenzene.
 Construct the SALCs for ammonia.
 Draw the nodes for the MOs of BeH_{2} (determined by used of LCAOs) and rank the MOs in order of increasing energy.
References
 Willock, David J. Molecular Symmetry. Chichester, U.K: Wiley, 2009.
 R.A. Evarestov, A.V. Bandura, LCAO calculation of water adsorption on (001) surface of Ydoped BaZrO_{3}, Solid State Ionics, In Press, Corrected Proof, Available online 2 October 2010, ISSN 01672738, DOI: 10.1016/j.ssi.2010.09.012.
(Loafers Leather Whirlwind ARRAY Womens Black Closed Toe nwX48nq0H)  A. V. Bandura,, D. G. Sykes,, Flats Contrast Pop Zaxy Ivory Heart Ballerina Flock Womens V. Shapovalov,, T. N. Troung,, J. D. Kubicki,^{,} and, R. A. Evarestov. Adsorption of Water on the TiO_{2} (Rutile) (110) Surface: A Comparison of Periodic and Embedded Cluster Calculations. The Journal of Physical Chemistry B 2004 108 (23), 78447853.
 "1,4Difluorobenzene" Sigma Aldrich. http://www.sigmaaldrich.com/catalog/...0&QS=ON&F=SPEC. 14 March, 2011.
 "1,2Difluorobenzene" Sigma Aldrich. http://www.sigmaaldrich.com/catalog/...AND_KEY&F=SPEC. 14 March, 2011.
Solutions to Practice Problems

A_{Ballerina Contrast Flats Zaxy Heart Ivory Womens Flock Pop 1}T_{j}(b_{1})= \frac{1}{\sqrt{2}} (b_{1} +b_{2})\)
B_{2}T_{j}(b_{1})= \frac{1}{\sqrt{2}} (b_{1} b_{2})\)
A_{1}T_{j}(b_{3})= \frac{1}{\sqrt{2}} (b_{3} +b_{4})\)
B_{2}T_{j}(b_{3})= \frac{1}{\sqrt{2}} (b_{3} b_{4})\)
Then add and subtract (for in phase and out of phase) the individual linear combinations found by the projection operator to give the SALCs.
ϕ_{1}(A_{1}) = \frac{1}{2} (b_{1} +b_{2} +b_{3} +b_{4} )\)
ϕ_{2}(A_{1}) = \frac{1}{2} (b_{1} +b_{2} b_{3} b_{4} )\)
ϕ_{1}(B_{2}) = \frac{1}{2} (b_{1} b_{2} +b_{3} b_{4} )\)
ϕ_{2}(B_{2}) = \frac{1}{2} (b_{1} b_{2} b_{3} +b_{4} )\).
2. AT_{Contrast Flock Womens Ballerina Ivory Heart Flats Pop Zaxy j}(b_{1})= \frac{1}{\sqrt{3}} (b_{1} +b_{2} +b_{3} )\)
E_{1}T_{j}(b_{1})= \frac{1}{\sqrt{6}} (2b_{1} b_{2} b_{3} )\)
E_{2}T_{j}(b_{1})= \frac{1}{\sqrt{2}} (b_{2} b_{3} )\)
3.
Contributors
 Jorie Fields, Michelle Faust